LesComm
Radio Expansion Boards
Documentation Project
CBTricks.com
|
The
8719-192-L Universal Radio Expansion Board This board will convert the aforementioned radio's to cover 180+ Channels*. It has a +10kc switch
and a 4 position band switch which allows band selection exactly like
the higher priced radio's.This way, when your buddy says "go to band
A channel 15" on his $500 radio, you can follow on your radio! The 8719-192-L Specific Radio Expansion Board For the Galaxy 2547, 919, 929, 979, 939, 949 or 959-DX but will fit any radio with the same board. Such as the Ranger Freedom-One TR696, 936, 966, 969. This board will convert one model of the above radio's using the 8719 PLL to cover 180 Channels*. The 4
position band switch allows band selection exactly like the higher priced
radio's. It also has a +10kc switch. Cobra 2000 Kit Due to so many request for a Cobra version, and since the 8719-180 is out of production, we've adopted this board to now convert the Cobra 2000GTL. You also get 180 Channels*. ***Soldering IS required. It is not Plug and Play like the Galaxy board. But we are working to make the installation easier.*** It also has a +10kc
switch and a 4 position band switch allows band selection exactly like
the higher priced radio's.
The 8719-192-L Cobra 148GTL Expansion ***Soldering IS required. It is not Plug and Since the 8719-180 is out of production, we've adopted this board to now convert the Cobra 148GTL. You also get 180 Channels*. It is not Plug and Play like the Galaxy board. But they are working to make the installation easier.*** It also has a +10kc
switch and a 4 position band switch allows band selection exactly like
the higher priced radio's.
NEW 8719-192-L ***V2*** 3 Band kit NEW Designed to compete directly with the Galaxy-Viagra Blue Dot board. Gives the same 3 band coverage but also has the +10kc switch to get those "A" channels. Yet, it retains the ability to upgrade.* Use either the NB/ANL switch or the TONE switch. For the Galaxy 2547, 919, 929, 979, 939, 949 or 959-DX but will fit any radio with the same board. Such as the Ranger Freedom-One TR696, 936, 966, 969. Simply change the crystal X3 with the one in the kit, unplug the NB/ANL or TONE switch and plug it into the board. Then unplug the channel selector cable and plug into the V2, plug the V2's cable to the main board. You're done!! No more center frequency shifts when you change bands because the switching is done in the PLL, not with crystals. MSRP is $39.99 |
|
Company
Web-site Company
contact info E-Mail is |
|
|
Disclaimer:
CBTricks.com does not warrant the accuracy of the information contained
herein nor is it responsible
for any errors or omissions and assumes no liability for the content on
this site.
While the CBTricks.com uses reasonable efforts to include accurate and up
to date information, CBTricks.com makes no warranties or representations
as to its accuracy
or timeliness and assumes no liability or responsibility for any errors
or omissions in the Content of this site.